🕷 Rigging Deck Plate with Pro HD Singles
Three rod holder locking🕷Rigging deck plate.
Spider rigging at its best!
Rod holders adjusts and lock in all positions at top and bottom. Deck Plate locks in 12 different positions left or right.
(1) Heights 12, 18 and 24 inch.
(2) Three inch round 1/8" thick deck or flush mount bases with four 1/4" screw holes. Jam nut, hardware cover. Base and Deck Plate included.
(3) Black vinyl polymer coated T-handles and Elites 7/16" thick stem Crappie V Master rod holder.
(4) Elites 12 point locking🕷rigging deck plate. Plate size: 1-1/2" wide 1/2" thick and 14" long with three rod holder mounting bolt holes.
HD Pro Single lays down to clear trolling motor or while traveling and may be removed from base for storage.
(Step 1) Loosen center rod holder to remove or locking plate or rotate spider rigging plate Locking System left or right. Then bolt rod holder back in place and tighten to secure system.
(Step 2) Pull back on rod holder or bottom shaft to release 5/8" locking system.
(Step 3) Push or pull back on rod holder shaft while rotating black quick release T-handle at bottom with your foot for desired vertical degrees. Push forward to lock degree in place. At base loosen jam nut rotate left or right. Tighten Jam nut to secure.
(Step 4) At rod holder top repeat Step 2 this time using your hand for all vertical and horizontal positions.
(Step 5) At top reverse Crappie V Master rod holder stem jam nut to bottom for left side locking with left hand threaded HD Pro Singles.
Reverse the two outside rod holder stem jam nuts to bottom of deck plate to stop swing on left side of boat. Center holder may be ordered in left hand threads.
At Top! Choose your rod holder L or R thread option along with height and bases option.
When ordering more than one add Qty. and place order.
Discover the difference Elite makes!
Looking for that edge? Look no further! Elite